Nowadays the bicycle has become a popular means of transportation. This transport is economical and environmentally friendly. It sets in motion its strength of the muscles of the legs of man. To transfer energy to the connecting rod, you need a pedal for a bicycle. It is thanks to them and their regular rotational movements that the bike can go forward.

What are pedals?

Pedals for a bicycle is a mechanism that is connected to a connecting rod. They play an extremely important role. There are several types of pedals, which differ between each other with different structure and purpose.

Pedal for a bicycle: what you need to know? Which pedals to choose?

How are the pedals

This mechanism is quite simple. There is nothing complicated in it. The most important part of the pedal is the axis. It is screwed into the connecting rod. The body is attached to it. It can be made of plastic, rubber or any metal. The design of different types of pedals is also different. The body itself can rotate around its axis for the convenience of the cyclist.

What are the types of pedals?

In general, there are two types of this mechanism, which differ from each other in construction. There are the most ordinary pedals and contact. The latter are already a more advanced option. They are needed for big races and long trips.

What is a "trample"

"Toptop" - this is the most ordinary pedal for a bicycle, which are put on all the initial models. They are called so because when pedals pedal, they are trampled on. From this they got their own name. Such pedals are divided into platform and walking.

Platform pedals for bicycles are often put on sports models. They are made of metal, and also have thorns or very good terrain. With the help of such devices it is good to drive off-road and rough terrain. Thanks to the design, the leg is well supported on the platform and does not jump off.

Walking pedals most often put on city and children's bicycles. They are usually made of plastic or rubber. The relief on them is not very noticeable, since it is not needed. They are installed on bicycles that are not designed for extreme skiing and high speeds.

How to change pedals on a bicycle for new

Choosing good "toptals", especially for beginners, is very important. Often, fans ask themselves how to change the pedals on a bicycle. In fact, there is nothing complicated. This requires only a wrench and new "traps". In order not to damage the fastening of the bicycle pedals (carving), one rule is necessary. To unscrew the right pedal, it is necessary to turn counterclockwise, and the left one - clockwise. This is done so that the pedals are not unscrewed due to constant movement. It is also important to install each element in its place. The right pedal must be attached to the right connecting rod, and the left one, respectively, to the right one. This is very important, because otherwise these things will fall off very often.

How to care for pedals

Unfortunately, nothing lasts forever, so you need to look after all the mechanisms on your bike. The bicycle pedal bush is not infrequently broken, but in order to significantly extend its service life, you need to be careful about it: do not beat strongly with your foot, sometimes unwind and lubricate with a solidol. If the pedal often flies and nothing can be done, then a special nut or washer will help. The same can be done if the connecting rod itself disappears.

How to choose the right pedals

Often newcomers do not know which pedals to pick up. There are several rules that must be followed when choosing the best model. First of all, you should pay attention to the material. Best of all, if it is any metal: steel, aluminum, and, most of all, titanium. There have been cases when at the most inopportune moment the plastic structure burst. After that, going somewhere was becoming very difficult. Metal in such cases will not let you down, so it's best to buy pedals from this material.

The second factor, which is worth paying attention to, is the relief. Anyone who thinks that pedals with spines can be traumatic, deeply mistaken. A good relief will not allow the leg to jump off the running board, which will reduce the risk for the cyclist to fall at the most inopportune moment. Do not be afraid for shoes, nothing will happen to it. Good thorns are a guarantee of safety for a bicyclist.

A light-reflecting element shall be built into the structure. Often it is invisible, but when you're driving in the dark, its cars traveling behind will be seen. It is better to have a built-in cataphyte in the pedals for your own safety.

Contact pedals

Many of us have already heard about the contact pedals for a bicycle. Prices for them often deter beginners. So what is it and why are such mechanisms needed?

Contact pedals are used by advanced cyclists who travel long distances. The thing is that ninety percent of cyclists drive wrong, wasting a lot of energy for nothing. Contact pedals are the basis for ergonomic pedaling. Thanks to them you can learn how to drive properly without wasting your energy.

Design of contact pedals

The contacts look like a stump with a special mechanism. To ride with them, you need special shoes with built-in attachments, which need to be inserted into this mechanism.

Contacts simplify the life of a cyclist: on ordinary pedals, you can apply effort only by pushing down, and in these - throughout the cycle. The design allows you to both lower and raise the pedal. Thus, you can smoothly distribute the load.

How many contact pedals are there?

The trouble is that for the contact pedals you need special shoes. This makes the transition from "toptals" to contacts more expensive. On average, you can go from one to another for $ 80. The price may vary depending on the firm and the quality of the product.

Interesting: