The variety of means and ways to organize the process of fishing makes it possible to find an optimal approach for almost every predator. Regarding pike, one of the most popular fish in Russia, there are also a lot of fishing techniques. But all of them assume the use of fishing rods with certain characteristics, the selection of suitable places for fishing and the application of baits corresponding to the tastes of this predator.

Criteria for choosing a spinning on a pike

How to choose a spinning rod for pike

The general rules for choosing spinning for fishing are not appropriate in this case. For example, many mistakenly opt for costly multifunctional tools, but the best spinning for a pike should be selected for specific performance characteristics. In particular, the process of pike fishing assumes an emphasis on sensitivity, but at the same time, one should not forget about the stiffness of the spinning, so that the equipment remains intact and has fulfilled the tasks set.

You can fulfill these conditions if you are guided by three selection criteria: the already mentioned stiffness, cadence and oakness. Further, these parameters will be considered in more detail, but it is important to understand initially that the corresponding spinning on the pike will allow to ensure optimal bait casting, sufficient characteristics of the pod and to cut the predator irrespective of its size.

The choice of rigidity

To understand the importance of this property, it must be borne in mind that the pike has a hard bony mouth. Thus, spinning with an insufficient degree of rigidity will make it possible to perform the cut only if the hook goes deep into the gills or, better still, directly hooks the fish's tongue. However, it is not necessary to count on such a success - successful fishing can be achieved only by using rods with increased rigidity. In this case, a hard spinning on a pike can have both a slow and a fast formation. These qualities should be considered separately - in the choice of equipment for pike they do not overlap. Therefore, preference is given to rigidity regardless of the structure.

Choice of caducity

This parameter should also not be associated with the system. It is influenced by the following indicators:

  • Power of the stump /
  • Length of the rod /
  • Taper of the blank.

Modern, technically more advanced spinnings can also increase cadence due to the functional fittings and coil parameters - in particular, the height of its leg positively affects this characteristic. In the language of professional fishermen, spinning on a pike, which has ample opportunities for caducity, is called a "bullet". If you plan to catch a predator on the far edge, then you can cope with this task only by an elongated model.

For comparison, we can give two examples of the use of rods. Fishing from the boat involves the use of models up to 2.5 meters in length, and "bullets" in this indicator may exceed 3 meters. Such spinning on the pike allows to make throws up to 70 m, which expands the possibilities of catching. True, in some conditions the use of long rods is impossible or, at least, uncomfortable. Therefore, it is necessary to consider in advance how appropriate the use of this or that spinning model on a particular site is. In general, "pushers" justify themselves when fishing from the shore, and from the boat the need for their application is not so significant.

The choice of spinning for oak

In this case, the criterion is not common for all pike fishing methods. Oakness of the spinning provides the possibility of applying this or that bait. Accordingly, the requirements for this characteristic may differ. But it is important to take into account that you can not catch a large pike with simple turntables and oscillators. For such a bait, the oak rate is really not important. However, if you use massive lures for pike fishing for spinning or a jigging jig with twitching is planned, then the best solution will be "oak" fishing rods.

In this case, no special calculations are required. The boundary between a heavy lure and a light wobblers is obvious. Another thing is that the effort that will take on the spinning from the bait, will begin to increase and due to the influence of other factors, besides weight. For example, if a pike is caught in the summer for spinning, it is possible to play underwater to attract a predator - accordingly, as a reserve for insurance, it is worth considering the influence of this factor.

Lure for pike

The choice of bait for pike is very diverse. If it is true to calculate the conditions of catching and make an amendment for the time of year, then you can use oscillating and rotating spoon-bait, wobblers, silicone jig baits, poppers and jerk. The most common option is a bait. Firstly, this is the favorite bait of beginners, since it does not require much effort in the process of use. Secondly, bait for fishing pike for spinning in the form of spoon-baits really give a good result both in gloomy weather and under the sun. For example, on a dull day it is recommended to use silver spoon-bait with the effect of oscillation. Conversely, in conditions of good natural light, dark baits are preferable. It is different with the wobblers. For beginners, this is a rather difficult bait in handling, but in experienced hands it also gives a good catch of pike.

When and where is it better to catch a pike?

Shchuchi are caught in any season. The main thing is to take into account the peculiarities of a particular season and to focus on the characteristic behavior of fish. So, in the spring months it is worth paying attention to the zones of reservoirs with whirlpools and pits. The best places for catching in the rivers are the bays and wanderers. Autumn is considered the most favorable time for catching predators, but not everyone knows the specific subtleties of how to catch a pike on spinning during this period. Large specimens are found in the channel brow and deep hole. Just at this time, and the nature of this fish.

The peculiarity of pike habits is that it does not chase prey, but takes a wait-and-see attitude. This is the reason for her love for hidden and secluded places. It is recommended to get it out of such shelters with jig-baits, deep-water wobblers and the mentioned spoon-bait. In winter, good results are shown in the holes in lakes and reservoirs. In the summer, despite the favorable external conditions, the pike is difficult to catch, so the features of such fishing should be considered separately.

Pike fishing in June for spinning

The beginning of summer in terms of catching a pike is not an easy task. The abundance of food at this time makes the predator finicky, and it is extremely difficult to get its location. An external factor, favorable for fishing, can only become cloudy weather with a thunderstorm. Fish feels bad weather and tends to catch the maximum of the prey. The fisherman should experiment with different baits using wobblers, lures and zhivtsov. If you plan to catch pike in June for spinning from the shore, then preference should be given to areas not overgrown with dense vegetation. But the predator can hunt in the coastal zone with an abundance of algae - accordingly, the spoon-bait should be carried along the water line to places of possible camouflage. In the beginning of the month it is worth trying to catch baits with "rattles", and in the end - to go to small oscillations. Also, do not forget about the color gamut of used lures - the shade should contrast with the water, attracting fish.

How to catch a pike in July?

The decline in predator activity continues in July, reaching its peak. During this period, you should also show restraint and patience, picking up different baits and changing the ways of catching. In terms of choosing the right places, it is worth noting the edges of the islets, bridge pillars, rocky ridges, pits under the banks, deep gullies and other secluded places. In rivers, the pike is particularly inactive. She does not spend her energy on the opposition to the current and wants to find a quiet place. It will be nice if you can use the boat. From the shore, some holes are difficult to reach, so the best pike in July for spinning is caught from the middle of the lake or pond. Experienced fishermen conduct special raids, investigating the bottom to detect pits with a sinker. Further, the identified depressions significantly increase the chances of catching large predators. Necessarily in the inventory and the presence of podsaka, as hoping for humble pike behavior in the summer is quite reckless.

How to catch pike in August?

In August, the behavior of the pike is most unpredictable. The fact is that this period is transitional from warm time to the first autumn cold snaps. And if the pike in July for spinning is caught with clear obstacles for the fisherman, then August often surprises. In the first place, the activity of the predator increases, so it is more likely to be used for prey. In addition, the fish becomes less finicky and leaves secluded places in search of food. But this does not mean that we need to radically change tactics. As before, the list of the best places for fishing will include pits, creeks, depressions in floodplains, places behind fallen trees and driftwood.

In the choice of bait, you must again experiment, as in the beginning of summer. But it is important to note one difference. The fact is that the pike can be reluctantly caught in June because of the abundance of its prey, and by August there is a reverse trend. The fish feels the arrival of colds and follows with great enthusiasm any bait. It can be the same bait, wobblers, etc. Do not ignore and catch on zhivtsa, which again is recommended to lead from the bottom.

Wiring for pike fishing

Tactics of catching is of special importance in fishing for pike. In particular, correctly selected podvodka often becomes the key to success. If pike fishing is conducted in July for spinning, then it is necessary to prepare for its passive behavior. In this case, the wiring should be slow and uniform. Optimal bait in such conditions - it's vibrations, turntables, vibro-worms and wobblers. The use of a jig bait, as well as a lop-swayer, involves a stepped wiring.

The most difficult are the jerky and tweaking wiring, since they require compensation for the slackness of the line by operating the coil and the rod. Usually this technique is used in autumn, but pike fishing in July for spinning also allows a jerk harness. Actually, a large predator is more likely to be caught by this method.

Conclusion

The only correct recipe for pike fishing does not exist. As can be seen, the success of fishing is affected by many factors, one of which is the choice of spinning. Given the characteristics of the behavior of fish, you can make a strategy for using bait and further posting. The question of how to catch a pike for spinning, also provides for the recording of weather conditions. Even if the rod is chosen correctly, a bait with an inappropriate shade can spoil the fishing process. For example, in cloudy weather the darkest bait gives the minimum result, and on a sunny day, all the efforts of a fisherman can be brought to nothing, or a wobbler of light tones. As a rule, consideration of external factors and competent preparation of equipment allow to get a rich catch of large fish regardless of the season.

Interesting: